This ensured the photograph didn’t turn out completely black.One of the best parts of macro photography is that you can photograph practically anything. To do this with such a small aperture I used my cameras onboard flash. This enabled me to shoot fast enough to capture a moving droplet. The digital SLR camera was set to shutter priority with a speed of 0.005 sec (1/200). Not all macro lens have this option so don’t worry too much if you can’t find AF on your lens. Note, I still had to turn off AF (automatic focus) on the actual lens. This time an extension tube was not used to take this photograph thereby eliminating the need for fully manual camera settings. Hence, the red color is shown exactly how the photo was saved directly from the camera.Ĭolored Water Drops Digital DSLR Camera: Canon EOS 400D / Rebel XTi No photoshop editing has been used other than to resize for display purposes. For example, the image below was photographed with a red piece of cardboard placed behind the tank. Macro water photography takes a lot of patience. You literally need to take hundreds of photographs to get a couple you will like.Make sure you use a real macro lens for best results.Now you’re ready to pierce a small hole in that bag and start taking photographs. Don’t turn your camera off or change the lens focal length at this stage, or your settings will be lost. This is how you’ll need to be when taking the photographs. As this happens, take notice of the position you’re standing from the subject. When you look through the view finder you should see a red focal point, flashing somewhere around the pencil tip. Instead, prefocus through the glass and onto the tip of a pencil, held approximately 1cm above the water in the same area you anticipate the droplet to fall. You also need to turn off your lens AF (automatic focus). When photographing water, it’s best to set your digital SLR camera to either shutter priority or manual mode (if using an extension tube). Where exactly do you need to focus the DSLR lens? However I found this too limiting and decided later on to hand hold the camera instead. The image below shows you how to set up a macro studio for capturing water splashes and drops.Īs you can see in the image above, I did try to use a tripod at first. If your following along with this home studio setup, it’s also important that you have good lighting and a nice cardboard background placed behind the tank for color. Hence, I placed a bag with a small pin hole over the top of the tank. Next, I knew to have the best chance of capturing the drop, it had to roughly fall into the same area with each splash. As you can see by my setup below, a fish tank was perfect for this. First lets start with the home studio set upįor starters, a water drop needs to fall into something that is clear enough for you to be able to focus directly through. Placing an extension tube between the camera’s body and its lens, also meant I had to shoot completely in manual mode. An extension tube allowed me to close in even further to fully fill the frame with the water droplet. The aperture for this photograph displays as f/0 due to the use of an extension tube. This is exactly what I did to capture the macro image of a water droplet as shown below.ĭigital SLR Camera: Canon EOS 400D / Rebel XTiĭSLR Lens: Canon EF 100/2.8 Macro USM lens One of the main advantages of using a digital SLR camera, is that you can focus on a subject directly through a sheet of glass.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |